Description

Genvolt Electron Beam power supplies consist of a range of high powered units, with power ranges available from 60kV up to 200kV. Both the DC filament and bias power supply are intergrated within the mechanical build.

Current for the filament and bias voltages are measured at high potential, with the measurement sent via fibre optic connection to the control system.

Genvolt electron beam power supplies in corporate high power inverter technology as well as a patented rectification transformer with low stored energy and high reliability.

Input specifications

AC input voltage range	Three Phase 360-440V, + neutral

Output specifications

High Voltage Power Supply	Power Supply Specification
Output voltage	60kV – 200
Output Power Options	3kW, 6kW, 10kW, 15kW, 20kW, 30kW and 40kW
Output Current	50mA, 100mA, 200mA, 300mA and 400mA
Stability of output current	<0.2%
Output polarity	Negative
Stability of Output Voltage	<0.2%
RMS of high voltage Ripple	<0.5%
Filament Power Supply	Filament Specification
Output Current	DC 0A – 50A
Output Voltage	0V – 20V
Stability of Filament Current	<0.5%
Bias Power Supply	Bias Specification
Output Current	Max. 0.5mA
Output Voltage	DC 0kV – 2kV
Stability of Output Voltage	<0.2%
RMS of Output Voltage Ripple	<0.5%

Protection

Circuit protection:

The units can adopt either air or water cooling technologies and comes with complete in-built protection against over voltage, over current, over heat and discharge detection. This enables the unit to perform continously over extended periods.

Control ports

User interface connector and rear panel connections:

There are five sets of wiring terminals on the rear panel of the power supply, which are the ports for remote control of the power supply.

Environmental details

Operating temperature	-10°C to 40°C
Relative humidity	<90% non condensing

Mechanical details

Weight	Dependant on Model
Dimensions	Dependant on Model