140kV, DC-input High Voltage Power Supply Unit
Description
The Cygnus series power supply is intended as a general purpose ‘workhorse’ source of high voltage. The electronics are compact and efficient operating on dual 24V or 120VDC nominal with automatic sensing. It is available in 19” format if required with ripple specification tailored to suit individual needs.
General Specification
| Input range | 22 to 32 VDC or 110 to 140VDC with automatic sensing. | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Output voltage | As specified up to a maximum of 160kV | ||||||||||||||||||
| Output power | 0 to 800W. | ||||||||||||||||||
| Controls | 0-5 volts control input. HV OK output. Unit enabled by active low signal. | ||||||||||||||||||
| Load regulation | Typically 0.01% over 0 to 100% rated load. | ||||||||||||||||||
| Line regulation | Typically 0.01% over 0 to 100% rated load.
|
The above table is intended as an indication of system capability; intermediate voltages and special requirements may always be discussed with our technical staff.
