1kJ/sec capacitor charging Power Supply Unit 10kV-150kV module
Description
High voltage modules capable of producing 2kW peak output at short intervals. Particularly suitable for capacitor charging applications and designed to operate from a wide range of dc input supply. Mains input can be discussed.
Specification
| Output Voltage | Model illustrated is 50kV. Higher voltages if required. Both positive and negative polarities are available. |
|---|---|
| Output Current | Peak current is 40mA for the example shown. |
| Duty Cycle | The model above is designed for low duty cycle operation (<10%). Continuous operation with appropriate heatsinking can be provided. |
| Input Voltage | The unit is designed to operate from a DC source such as a battery pack. For 1kJ/sec 2kW pk operation, a 100-140VDC supply is required. (However, for 500J/sec 1kW pk, operation from 20-48V is available). |
| Input Current | Less than 25A maximum, depending on input voltage. (50A for low voltage use) |
| Environment | 0 to 50°C ambient. Non-condensing atmosphere. |
| Weight | Model shown is 13kg |
| Stability, Ripple, etc | The unit is designed for capacitor charging with a maximum PRF of 100Hz. For CW operation, ripple and stability can be tailored to suit the customer’s own specification. |
| Control Interface | Active low HV ON input. 0-10V HV and current limit programming, OC-TTL constant voltage/current outputs, 0-10V HV and current monitor outputs. |
