High voltage power supply
Description
The MVB550P is a high voltage power supply capable of outputing a voltage of 400 Volts and an output power of 550 Watt.
Input specifications
Input voltage | The input voltage range is 160VAC to 240VAC |
---|---|
Input voltage frequency | 40Hz to 60Hz. |
Output specifications
Output 1 | |
Output voltage (DC) | 400V |
---|---|
Output voltage tolerance | 396V to 404V over the specified load and temperature range. |
Output voltage regulation | Less than +/-0.5% over the specified load and temperature range. |
Load regulation | Less than +/-1% over the specified load and temperature range. |
Output ripple voltage | 200mV maximum over the specified load and temperature range. |
Output current | 0 to 1.375A |
Max specified output power | 550W |
Output 2 |
|
Output voltage (DC) | 15V. |
---|---|
Output voltage tolerance | 14.8V to 15.15V over the specified load and temperature range. |
Output voltage regulation | Less than +/-0.5% over the specified load and temperature range. |
Load regulation | Less than +/-1% over the specified load and temperature range. |
Output current | 0 to 5A. |
Max specified output power | 75W. |
Protection
Short-circuit protection |
In the event of an output short circuit, the current at each output will be limited as follows. When operating at the nominal input voltage and over the specified temperature range. |
---|---|
Output 1 | Less than 3A |
Output 2 | Less than 9A |
500VDC insulation test for the MVB550P. | |
Input to output | >200MΩ |
Output to case | >200MΩ |
Input to case | >200MΩ |
Operating Conditions
The following environmental limits should be observed when using the power supply.
Ambient temperature | 0°C to 40°C |
---|---|
Relative humidity | Less than 80%, non-condensing |
Reliability and Quality Control
Power supply tests – Each power supply has been tested with no load and a short circuit load. They have also been soak tested for no less than 48 hours at full load.
Mechanical Specifications
Length | 300mm |
---|---|
Width | 250mm |
Height | 80mm |
Weight | kg |
Safety & Copyright
This power supply contains hazardous voltages and stored energy. Contact with the output may result in fatal injury. It should only be used and maintained by trained personnel.This document and the products covered are protected by copyright.