Description

The Titan Power supply is designed for high speed, high power capacitor charging applications at voltages up to 120kV, 45kJ/sec and PRFs as high as 250Hz.

It uses a rugged IGBT based inverter running in resonant mode to achieve high efficiency and excellent ruggedness.

It is designed to run, either from a high DC voltage input (typically 550V), or from UK/EU3-phase input.

Input

Voltage source	550VDC or 415VAC three phase mains input

Output

Average Power	45000J/sec
Output voltage	0 to 60kV | 0 to 120kV
Output current	1.65A maximum | 0 to 800mA
Polarity	Positive or negative
Repetition rate	250Hz maximum
Duty cycle	2 seconds on-load by 2 minutes off-load operation
Guard band protection	200us fixed after load discharged
HV connector	Proprietary connector
HV cable	Mating cable and connector supplied with PSU.
Cable length	3 metres detachable

Control

Charge enable	Fibre optic input, active light on
Voltage program	Adjusted by 10 turn potentiometer with a DVM reading on front panel.
Voltage monitor	0 to 10V represents 0 to 60kV output through BNC connector
End of charge	Fibre optic output, active light on

Environment

Operation temperature	10 to 40°C
Storage temperature	-10 to 60°C
Humidity	0-90% (non-condensing)
Cooling	Forced air

Mechanical

Height	9U | 11U
Depth	560mm (Handles excluded) | 780mm (Handles excluded)
Width	19” Rack | 605mm
Weight	70kg | 100kg