Description

The LAB300-60KP Range supplies are designed for general purpose. It has stable output and a high tolerance to noise. There are various self-protection technique applied.

Input specifications

AC input voltage range	240V±10%

Output specifications

Maximum output voltage	0-60kV adjustable
Maximum output current	0-5mA adjustable
Polarity	Reversible polarity. Please specify.
Line regulation	Less than 0.5%
Load regulation	Less than 0.5%
Ripple	Less than 0.5%

Protection

Short circuit protection	The output current will be limited to the set value when operating in the current limit mode. This will protect the circuit from excessive current output.
Spark protection	When the power supply experiences a spark on load, the output will be switched off momentarily.After which, it will be restored automatically.
Over-current protectio	The current limiting circuit will reduce the output to a safe level when the output current exceeds rated current.

Controls

The front panel allows adjusting the output voltage and current by two 10 turns potentiometers. There are also two D connectors on the rear panel with RS232 and RS458 serial communication.

Environmental details

Ambient temperature	-10 to 40°C
Relative humidity	Less than 80% non condensing

Mechanical details

See datasheet.

Reliability and Quality Control

Each power supply has been soak tested for no less than 48 hours at full load. Severe flash tests are also administered.

Safety

This power supply contains hazardous voltages and stored energy. Contact with the output may result in fatal injury. It should only be used and maintained by trained personnel.